Home › Products › Staffa motors › Smart Motor
Staffa Smart Motor
Infinitely variable displacement, under control.
Home › Products › Staffa motors › Smart Motor
Infinitely variable displacement, under control.
A Staffa HPC motor with closed-loop electronic displacement control, on the HPC200 and HPC325 frames. Supplied and supported from Silsden, West Yorkshire.

2frames
Frame sizesHPC200 and HPC325.
5,326cc/rev
Largest displacementHPC325; the HPC200 reaches 3,087 cc/rev.
3modes
Control modesConstant torque, constant power or constant speed.
800h
Salt spray ratingZinc-nickel coated valve, to ISO 9227.
Overview
The Staffa Smart Motor is a Staffa HPC radial piston motor with closed-loop electronic displacement control. Its controller measures the actual displacement and adjusts a proportional valve, so the displacement can be set anywhere between maximum and minimum, under load and while rotating, motoring or pumping.
It runs in constant torque, constant power or constant speed, and senses speed, direction, absolute shaft position and displacement. Smart+ adds CANopen pressure transducers, so the motor reports live torque, power and mechanical efficiency and can act as a CANopen master or slave. KPM UK offers production and evaluation units.
We are a UK distributor for Kawasaki Precision Machinery, supplying Staffa motors and genuine KPM spares. The Smart Motor uses the HPC frames, so its pressure, speed and power ratings follow the HPC datasheet.
Smart or Smart+?
Key advantages
Infinitely variable between maximum and minimum, changed under load and while rotating.
Constant torque, constant power or constant speed, from a rugged hydraulic motor.
Speed, direction, absolute shaft position and displacement sensing.
Torque, power and mechanical efficiency over CANopen on Smart+, with datalogging and USB live monitoring.
Set how the motor responds when a fault or unsafe load is detected.
A zinc-nickel coated valve rated 800 hours against ISO 9227 salt spray, and a mechanical freewheel option for anchor handling winches.
Technical data
Smart and Smart+ share the motor, the controller and the sensors; Smart+ adds the pressure transducers.
| Item | Smart (HPCe) | Smart+ (HPCi) |
|---|---|---|
| Frames | HPC200 or HPC325 | HPC200 or HPC325 |
| Max. displacement | 3,087 or 5,326 cc/rev | 3,087 or 5,326 cc/rev |
| Displacement control | Closed loop, infinitely variable | Closed loop, infinitely variable |
| Control modes | Constant torque, power or speed | Constant torque, power or speed |
| Inputs | Analogue preset (0 to 5 V, 0 to 10 V, 0 to 20 mA or 4 to 20 mA); digital I/O | Analogue, digital or CANopen |
| CANopen | Optional | Standard; master or slave |
| Sensing | Speed, direction, absolute shaft position, displacement | As Smart, plus port pressures for torque, power and efficiency |
| Controller supply | 24 V DC | 24 V DC |
| Connections | M12 8-pole and 5-pole; Deutsch DT04 valve connector | As Smart |
| Hydraulic connection | SFM4 (1½” SAE code 62) or SM4 manifold | As Smart |
Pressure, speed and power ratings follow the HPC datasheet for the HPC200 and HPC325 frames. Source: KPM UK Smart / Smart+ datasheet (file M-200712.24-HPCe, December 2024).
Applications
Escort and towing winches, anchor handling, auto-tensioning
Active heave compensation
Drilling and piling rigs
Dynamometers, such as a test rig at 20,400 Nm continuous
Want to see one working? KPM’s Smart Motor case history describes one in service.
Talk it through
Tell us what the motor drives and how you want to control it, and we will talk you through the options.
Upgrading
The Smart Motor uses the HPC200 and HPC325 frames. If you already run one of those, or an HMC or HPC on a similar duty, send us the model code and the duty and we will look at the Smart route.
KPM UK offers both, so a Smart Motor can be trialled on your machine.
The model code of the motor you run now, what it drives, and how you want to control it: torque, power or speed.
Model code
Let’s talk Smart
We just need three details.
Running an HPC already? Send us the model code and what the motor drives, and we will work from those.
1
What the motor drives, its torque and its speed.
2
Constant torque, power or speed, and how you will command it.
3
Whether you need live torque, power and efficiency (Smart+).
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Both have the controller, encoders and proportional valve, with analogue and digital control. Smart+ adds two CANopen pressure transducers, so it calculates live torque, power and mechanical efficiency, detects motoring or pumping, and can act as a CANopen master or slave.
Yes. It changes continuously under load and while the motor rotates, whether motoring or pumping.
The HPC200, up to 3,087 cc/rev, and the HPC325, up to 5,326 cc/rev.
By an analogue displacement preset (0 to 5 V, 0 to 10 V, 0 to 20 mA or 4 to 20 mA), digital I/O, or CANopen, with a 24 V DC controller supply.
Escort, towing and anchor handling winches, auto-tensioning, drilling and piling, test rig dynamometers and active heave compensation.