Skip to main content

Home › Products › Staffa motors › HMC

Staffa HMC Dual Displacement Motor

Two displacements, changed on the run.

Seven frames from 492 to 5,326 cc/rev, with a freewheel in zero displacement. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa HMC dual displacement radial piston hydraulic motor

5,326cc/rev

Largest displacementHMC325; the HMC030 reaches 492 cc/rev.

2speeds

DisplacementsAny two codes per frame, changed on the run.

1,500rpm

Freewheel speedIn zero displacement, with crankcase flushing.

213kW

Intermittent powerHMC270 and HMC325; 189 kW continuous.

Overview

The Staffa HMC motor: two displacements, changed on the run

The Staffa HMC is Kawasaki’s dual displacement radial piston motor. It runs at two preset displacements and switches between them while turning, so one motor can give high torque at low speed and less torque at higher speed.

Seven frames run from HMC030 to HMC325, with maximum displacements from 492 to 5,326 cc/rev. A directional control valve, on the motor or mounted remotely, selects the displacement hydraulically, and if control pressure is lost the motor returns to its high displacement. Zero displacement lets it freewheel at up to 1,500 rpm, and a constant pressure regulator option makes the displacement continuously variable.

We are a UK distributor for Kawasaki Precision Machinery, supplying HMC motors and genuine KPM spares, and we make the Staffa brakes that fit them.

Which Staffa motor?

Choose the HMC for two speeds from one motor

  • Two speeds at higher power: the HPC
  • Three preset displacements: the HMF; four: the HPC400
  • Infinitely variable, with digital control: the Smart Motor
  • One speed range is enough: the HMB

Key advantages

Why choose a Staffa HMC

Two speeds, one motor

Switch between two preset displacements while the motor is turning.

Freewheels when it needs to

Zero displacement for freewheeling at up to 1,500 rpm; KPM prefers the HMC to fixed displacement motors for this.

Returns to full torque

If control pressure is lost, the motor shifts to its high displacement.

Continuously variable option

A constant pressure regulator adjusts displacement to hold inlet pressure, set from 180 to 220 bar.

Hydrostatic balancing

High efficiency and good breakout torque, with smooth running at low speed.

Built for hard places

Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.

Technical data

Staffa HMC technical specifications

Each frame offers displacement codes from its maximum down to zero, and the motor runs on any two, set in the model code. Figures are at the maximum displacement. Where two speeds are shown, the first is with size 3 valve housings and the second with size 4.

Frame codeMax. displacement (cc/rev)Running torque (Nm/bar)Continuous pressure (bar)Continuous speed (rpm)Continuous power (kW)Intermittent power (kW)
HMC0304926.862074506066
HMC04573710.6325045099119
HMC0801,60023.9250270 / 365138170
HMC1252,04829.9250215 / 300135152
HMC200Also HMHDC2003,08746.6250175 / 230174195
HMC2704,58869.4250150189213
HMC3255,32680.4250130189213

Intermittent pressure is 300 bar (250 bar on the HMC030) for 15% of the duty in periods of up to 5 minutes. Every frame freewheels at up to 1,500 rpm in zero displacement, with 15 l/min of crankcase flushing above 1,000 rpm. Source: KPM UK HMC datasheet (file M-200203.17-HMC), which lists every displacement code with its torque, speed and power.

Options

Options and configurations

Every option is set in the model code, so a replacement motor can be matched exactly.

Shafts

Parallel keyed, BS 3550 splined and DIN 5480 shafts on every frame, and a long taper keyed shaft from the HMC080 up. Add V for a vertically upward shaft.

Ports and valve housings

Size 3 frames have 1¼” ports and size 4 frames 1½” ports, in symmetrical manifold (SM), symmetrical SAE flange (SFM) or offset SAE flange (F and FM) housings.

Displacement control

X for external pilot ports, C or CS for a single supply without or with a shuttle, and CP or CHP constant pressure regulators.

Speed sensing

Tj: a dual-channel Hall effect sensor giving speed and direction, 16 pulses per revolution, sealed to IP68 and powered from 8 to 32 V. Tk adds a T401 module with a tacho, a relay and a 0/4 to 20 mA output.

Seals

A high pressure shaft seal, rated 10 bar continuous case pressure, for cold climates, and a stainless steel shaft sleeve for corrosive conditions.

Paint and cylinder heads

Marine primer paint, marine-style cylinder heads that shed water, and marine paint finishes.

Performance options

Increased starting torque, anti-clockwise rotation, improved cavitation resistance for overrunning loads, and thermal shock resistance for cold starts.

Brakes

Staffa F032 and F102 brakes fit the HMC030 and HMC080, and the F202 and F402 fit the HMC200, HMC270 and HMC325. Made by us; ask about other frames.

Applications

Where HMC motors work

Marine and offshore

Deck and mooring winches, deck cranes, ROV launch systems, pipe handling

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Need more power from two speeds? The HPC is the high power version of the HMC.

Downloads

Staffa HMC downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Staffa HMC datasheet

M-200203.17-HMC · PDF

Download

Staffa ATEX reference — confirm current documentation

M-10.18 · HMB, HPB, HMC, HPC and HMF · PDF

Download

Installation drawings

By frame, HMC030 to HMC325 · PDF

View

Spares drawings

HMC and HPC 5-cylinder frames, 030 to 200 · 7-cylinder frames, 270 and 325

View

3D CAD models

By model code, for every frame

View

Can’t find it?

Need the drawing for your exact motor?

Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.

Replacing a motor

Replacing an existing HMC motor

Every HMC carries its model code on the nameplate. Send us the full code and we will match the frame, both displacements, the control and the options, or tell you what has replaced them.

Both displacements matter

An HMC model code carries two displacement codes, such as 250/100, and a control code such as CS. Send us the whole code so we match all of them.

What to send us

The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.

Spares and repairs

We supply genuine KPM spares for HMC motors. Quote the model code, or the part number from the spares drawing. Need a repair rather than a replacement? Call us and we will talk it through.

Model code

How to read an HMC model code

  1. Fluid: blank for mineral oil, F3 for phosphate ester, F11 for water-based fluids
  2. Frame size: HMC030 to HMC325
  3. Shaft type: such as S3 or P1, plus V for vertically up
  4. Displacements: two codes, such as 250/100
  5. Main ports: such as SM3, SFM4 or FM4
  6. Displacement control: X, C, CS, CP or CHP
  7. Speed sensor: blank, Tj or Tk
  8. Design series: the current series number
  9. Special features: a P code for catalogued options, or PL for features KPM numbers individually

Let’s find your motor

Looking for an HMC motor or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa HMC questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Can an HMC change displacement while it is running?

Yes. A directional control valve selects the displacement hydraulically while the motor turns. Control pressure must be at least 67% of the higher port pressure, and at least 3.5 bar.

What happens if control pressure is lost?

The motor shifts to its highest displacement, so it keeps its full torque.

Can an HMC freewheel?

Yes. With zero displacement selected, the ports connected and the circuit boosted, it freewheels at up to 1,500 rpm. Between 1,000 and 1,500 rpm it needs up to 15 l/min of crankcase flushing.

What is the difference between the HMC and the HPC?

Both are dual displacement. The HPC is the high power version, rated up to 278 kW continuous with crankcase flushing, against 189 kW for the HMC.

Which fluids can an HMC run on?

Mineral oil as standard. Phosphate ester (HFD) runs with the F3 prefix at the full 250 bar continuous. Water-based fluids (HFA, HFB and HFC) run with the F11 prefix at 103 to 138 bar continuous depending on type, and HFA and HFC at half the mineral oil speed limits.