Skip to main content

Combination Drive SolutionsHigh torque.One complete drive.

Sized around your machine.

When a duty needs more torque than a single hydraulic motor should carry, the usual answer is a bigger, more expensive motor. We take a different route: a Kawasaki Staffa radial piston motor and an OEM Staffa failsafe brake, matched to an I-MAK planetary gearbox and supplied as one cost-effective package.

Get a sized package and priceCall +44 (0)1535 655 151
Combination drive assembly: Kawasaki Staffa radial piston motor, Staffa failsafe brake and I-MAK planetary gearbox

Planetary
gearbox

The torque multiplier

up to 2.5m Nm

Staffa
brake

Spring applied

up to 32.5 kNm

Staffa
motor

Hydraulic power

up to 430 kW

One package. One drawing. One supplier.

2Years

Warranty as standardWith UK service and genuine spares.

4Weeks

Minimum lead timeStaffa units built and stocked in the UK.

2.5mNm

Output torqueAcross 24 standard planetary gearbox frame sizes.

OEM

Failsafe brakesMade in-house by the only remaining OEM source.

Why a combination drive

Torque bought with a ratio, not with displacement.

A single large motor has to produce every newton metre of output torque by itself, so its size and cost climb with the duty. A combination drive splits the job. A smaller, cooler Staffa radial piston motor does the work, and an I-MAK planetary gearbox multiplies it to the torque your machine needs.

Because we size the ratio around your duty, the output speed lands where your machine needs it, not where the nearest motor size happens to sit.

MOTOR

The usual answer

One very large motor

Torque bought with displacement. Proven, simple, and expensive at high torque.

MBGEARBOX

Our answer

Motor, brake and gearbox

Torque bought with a ratio. The same shaft torque from an efficient, more cost-effective package.

Full torque from zero speed

Staffa radial piston motors start under load at working pressure, with high breakout torque for heavy starts.

The hydraulics protect the gears

Pressure limiting helps control hydraulic drive torque. The motor, gearbox, brake and circuit must also be checked for starting, reversing, shock and overrunning loads.

Failsafe by design

The Staffa brake is spring applied and hydraulically released, so it holds the load whenever pressure is removed.

One drawing, one supplier

We design the interface between motor, brake and gearbox, and supply the assembly as one item.

What’s in the package

Three proven components. One engineered drive.

Each part comes from a range we already supply and support, so you get established hardware, sized together for your duty rather than a one-off design.

Combination drive with splined output shaft: I-MAK planetary gearbox, Staffa failsafe brake and Kawasaki Staffa radial piston motor

01

I-MAK planetary gearbox

The torque multiplier

Output torqueup to 2.5m Nm

  • 24 standard frame sizes with custom ratios
  • In-line or right-angle input
  • Foot, flange or torque arm mounting
  • Solid, hollow, splined or shrink-disc output

02

Staffa failsafe brake

Spring applied, hydraulically released

Static brake torqueup to 32.5 kNm

  • Multidisc design, mounted directly to the motor
  • Holds the load whenever pressure is removed
  • Compatible across the Staffa motor range
  • Made in-house by the only remaining OEM source

03

Kawasaki Staffa motor

Radial piston hydraulic power

Shaft powerup to 430 kW

  • 188 to 8,000 cc, up to 250 bar continuous, by model
  • Fixed, two-, three-, four-displacement and continuously variable options, by series
  • Cooling and crankcase flushing specified for the selected motor and duty
  • Mountings to match most existing interfaces

Three ways to match your machine

Choose the route that fits the duty.

We will recommend the simplest route that does the job properly. Sometimes that is a Staffa motor on its own, and we will tell you so.

Motor to 25 kNm

Staffa Motor

High torque directly at the shaft, with the motor selected for the duty.

  • Cooling and crankcase flushing specified for the selected motor and duty
  • 188 to 8,000 cc, up to 250 bar continuous, by model
  • Fixed, two-, three-, four-displacement and continuously variable options, by series
  • Mountings to match most existing interfaces

With gearbox 25 kNm to 2.5m Nm

Combination Solution

Torque bought with a ratio, not with displacement.

  • Staffa motor, failsafe brake and planetary gearbox in one unit
  • In-line or right-angle input; foot, flange or torque arm
  • Solid, hollow, splined or shrink-disc output
  • Slow, high-torque duties up to 2.5m Nm

With the Staffa Smart Motor

Smart Combination Solution

Inverter-grade control. Hydraulic protection.

  • Infinitely variable displacement, changes under load
  • Constant torque, constant power or constant speed
  • Live torque, power, position and efficiency on CANopen
  • Independent control of twin drives on one supply

Applications

Built for machines that turn slowly and work hard.

Recycling and waste

Shredders, granulators, balers, trommels

Marine and offshore

Deck winches, mooring, cranes

Quarrying and minerals

Apron feeders, conveyors, mill inch drives

Timber, pulp and paper

Debarking drums, chippers, log decks

Bulk handling and ports

Ship loaders, rotating chutes, hatch covers

Process and infrastructure

Mixers, kiln drives, screw pumps

Let’s size your drive

Looking for a sized package and price?

We just need three details.

Replacing or matching an existing drive? Send us some photos, the information plate and any existing model codes, and we will work from those.

1

Torque

Continuous and peak, at the output shaft.

2

Speed

Output rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your three detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Common questions.

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is a combination drive?

A combination drive is a Kawasaki Staffa radial piston motor, a Staffa failsafe brake and an I-MAK planetary gearbox, sized together for one duty and supplied as a single assembly, with one drawing and one supplier responsible for it.

Why not just use one large hydraulic motor?

A single large motor works, and for some duties it is the right answer. On slow, high-torque duties, a combination drive buys torque with a gear ratio instead of motor displacement, so a smaller Staffa motor does the work and the planetary gearbox multiplies it. That gives the same shaft torque from an efficient, more cost-effective package. Up to around 25 kNm, a Staffa motor on its own is often the simpler choice, and we will recommend it where it fits.

Can a combination drive replace an existing drive?

Often, yes. Staffa motors are available with mountings to match most existing interfaces, and the gearbox can be supplied with foot, flange or torque arm mounting and solid, hollow, splined or shrink-disc output. Send us photos, the information plate and any existing model codes and we will look at a match.

What do you need from me to size a drive?

Three details: the torque at the output shaft, continuous and peak; the output speed in rpm, and the range if it varies; and the duty, meaning hours per day, starts per hour and direction changes.

What warranty and lead time can I expect?

Every combination drive comes with a two-year warranty as standard, backed by UK service and genuine spares. Staffa units are built and stocked in the UK, with lead times from four weeks depending on the configuration.

What does the Smart Combination Solution add?

It uses the Staffa Smart Motor, which offers infinitely variable displacement that changes under load, constant torque, constant power or constant speed control, live torque, power, position and efficiency data on CANopen, and independent control of twin drives on one supply.